Wilcom VDSL2 master CPE POTS splitter
PS-36
- The PS-36 Master POTS Splitter is compatible with all ADSL and VDSL2 coding schemes
- Meets ITU-T and ANSI Standards
- RJ Jacks and Terminal Block
- The unique design of the PS-36 reducesvideo pixelaization during ringing / ring-trip
- The compact PS-36 can be wall-mounted with screws through the holes in the mounting flange or with double-stick tape.
- Supports connections to 30 MHz for the full 4096 subcarriers and data speeds of 200 Mbps.
1 800 204 0555
Email Us
Visiting Us
The Wilcom PS-36 Master Splitter is a passive low-pass filter
designed to provide POTS service in concert with VDSL2
technology. The device blocks high frequency (20kHz-30MHz)
energy from interfering with voice equipment and prevents POTS
noise from causing data errors on the xDSL connection. The PS-36
is backwards compatible with all xDSL systems.
The Wilcom PS-36 is ideally suited for video over xDSL applications
such as IPTV (Internet Protocol Television) by providing robust ringtrip
protection for non-zero cross ringers to eliminate video
pixelization during off-hook and ring-trip events.
The PS-36 can be easily mounted inside the customer premises where the phone service enters the
building. Two types of connection options are supported by the PS-36 splitter: a screw-type terminal
block and standard RJ jacks. This allows the installer to simply connect the existing premise wiring to
the PHONE connector or RJ jack on the splitter, and have POTS service up and running within minutes
without expensive and time-consuming rewiring. A "home-run" connection with data-grade cable is
recommended direct to the xDSL modem from the ATU-R/MODEM connection on the splitter.
- Corner Frequency :7kHz
- Insertion Loss (1kHz) :< 0.25dB
- 30kHz Attenuation :> 65dB
- Attenuation Distortion (0.2kHz-3.4kHz): < 0.25dB
- Delay Distortion: < 50μs
- Return Loss (600 + 2.16uF, typical):ERL +27dB
- Return Loss (600 + 2.16uF, typical):SRL-LO +18dB
- Return Loss (600 + 2.16uF, typical):SRL-HI +20dB
- DC Resistance :< 20 Ohms
- Longitudinal Balance :> 70dB
- Maximum Loop Current :300mA
- Terminal Block Wire Guage :19-26 AWG
- Terminal Block Screw Size :5mm
- imensions (HWD) :3.9x2.1x1.0" ( 99x53x25 mm)
- Weight :3.2 oz. (99.53 g)
- Operating & Storage Temperature: -40°C to +85°C
- UL/cUL 1863 Listed
- ACTA Registered
- CS-03 Registered