OvisLink 
Wireless High Power Outdoor Solutions

 

Download User Manual(129M)

The OvisLink AirLive Outdoor family is the most complete outdoor wireless solution in the industry. There are 6 models to meet the demand of all type of environment and applications. They allow transmission distance up to over 30 kilometer in open space. Every model is constructed of rock solid weather-proof cast aluminum to operate in the most extreme environment.

All model includes a complete Power over Ethernet package with a 25 meter water-proof cable and DC injector unit. Therefore you can use indoor power source and install the outdoor unit within close distance to antenna for minimum cable signal loss.

The easy- to-use SNMP management utility include a built-in file transfer function to make antenna alignment simple. Data security in protected by the WEP, MAC access control and 802.1x functions. The AP model allows the WISP, Hotel, Resort, or Campus to provide internet access over wide area wirelessly. The bridge models are for wireless building-to-building network application. It delivers higher transmission rates than an E1 or T1 line, and eliminates the inconvenience of installing expensive leased line or fiber-optic cable. All models can change firmware to operate in AP, Bridge or Client mode.


The unit includes a complete Power over Ethernet package with a 25 meter water-proof cable and DC injector unit. Therefore you can use indoor power source and connect to network indoor. The outdoor unit can be installed within close distance to antenna for minimum cable signal loss.

Click to view "Installation of Wireless Outdoor Devices"
Click to view "Point-to-Point mode application"
Click to view "Point-to Multipoint mode application"

IEEE 802.11b Compliant
Complies with the IEEE 802.11b wireless standard,

Superior Coverage and High Signal Quality
Advanced radio technology provides outstanding performance at distances over 30 km (18 miles). (Maximum distance depends on choice of antenna.)

Superior receiver sensitivity enhances pickup of weak data signals over greater distances
.
Rugged design proven in outdoor installations in locations affected by wind, rain, and snow.

Remote Configuration
Allows administrators to manage the bridge from anywhere on the network.
DHCP client support: automatically obtains a new IP address from a DHCP server.
Bulk configuration: automatically propagates configuration settings to multiple bridges on the same subnet .

Multi-level Security
WEP (Wired Equivalent Privacy): 64- and 128-bit

SNMP access control: SNMP authentication prevents tampering with bridge settings.

Antenna Alignment Monitoring
The Bridge/AP’s utility performs intelligent antenna alignment monitoring for quick, convenient, and accurate alignment.

Comprehensive Network Management Tools
Full-featured Windows-based SNMP software included
Auto IP address assignment - automatically assign itself a new IP address should the DHCP server fail.

Bridge discovery - allows quick location of all OvisLink bridges for centralized management.

Protocol filtering: saves bandwidth and increases security by preventing the bridge from transmitting specified protocols from the wired Ethernet LAN into the wireless zone.

Trap server: with auto-notification, network administrators can easily monitor operating conditions and take preventive action to ensure maximum network uptime.

Outdoor Protection Solution for Harsh Weather
The Outdoor Protection Package allows the bridge to be located outdoors, where it may be subjected to wind, rain, and snow.

Power Over Ethernet
PoE reduces power-cable installation expenses and increases location options by carrying both data and power to the bridge through a single Ethernet cable.

Standards Compliance
IEEE 802.11b

RF Spreading Method
Direct Sequence Spread Spectrum (DSSS)
Frequency Band
2.4 GHz
Transmission Power
WHB/WHP-1100 (20dBm)
WHB/WHP-1120 (20dBm) + 18dBi antenna
WHB/WHP-1130 (30dBm)
Transmission Rates
11, 5.5, 2, and 1 Mbps, with auto fallback
Transmitter Characteristics
Frequency stability: within 25 ppm
Receiver Sensitivity
WHB/WHP-1100: -83dBm
WHB/WHP-1120: -83dBm
WHB/WHP-1130: -100 dBm
Security
64- and 128-bit WEP encryption; SNMP authentication for authorized access
Software Support
-SNMP-based network management tools for Microsoft Windows included
-MIB I and MIB II support, bridge discovery, protocol filtering, trap management, firmware upgrades.

Environmental Requirements
Operating Temperature: -20 to 70 oC
Storage Temperature: -30 to 80 oC
Humidity: 5% to 95%, non-condensing

Dimensions & Weight
WHB/WHP1100: 165 X135 X 55 mm (1.13kg)
WHB/WHP1120:  263 X 263 X 85mm (2kg)
WHB/WHP1130: 165 X135 X 100 mm (2kg)

Power
Input voltage 12V DC; external power supply included (input voltage 100V to 240V AC)

Regulatory Approval
FCC, CE, Japan, Telec (1100 and 1120 series)
NMS Operating Environments
Windows 98, Me, NT 4.0 (SP4 or above), 2000, XP
 

Ordering Information:

WHB-1100 20dBm Outdoor Bridge
WHP-1100 20dBm Outdoor AP

WHB-1120
20dBm Outdoor Bridge with Antenna and
Lightning Protector Package.
WHP-1120
20dBm Outdoor AP with Antenna and
Lightning Protector Package.

WHB-1130 30dBm Outdoor Bridge
WHP-1130 30dBm Outdoor AP