The Wall Mount DSL Adapter mounts to an existing wall mount phone jack providing an unfiltered jack for your DSL connection plus one or two filtered lines for voice device communications (e.g. phone, fax, answering machine, Caller ID box) via two auxiliary phone jacks. Used at each phone jack in use, the wall mount DSL filters eliminate all erratic impedance from telephone equipment that can interfere with DSL communications.

Product Features

• Customer installable, this adapter securely snaps over existing wall jack
• Provides one or two filtered lines via two voice jacks and includes an auxiliary DSL Jack
• Line 2 is pass through to all connections
• Filter Topology is 2-pole Low Pass
• REN = 0.1 (B)
• Loading capacity on telephone port is 15.5 nf
• Meets ANSI T1.421 standards for DSL filter compliance
• FCC Registered; Complies with Part 68, FCC Rules

Ordering Information

Part Number Item Description
630LCCU-50 1 Line Filtered (pins 3 & 4), 2 voice jacks, Auxiliary DSL jack
630LCCU-2F-50 2 Lines Filtered (pins 3 & 4, 2 & 5), 2 voice jacks, Auxiliary DSL jack
Packaging: 1 filter/bag; 20 bags/carton

Electrical Characteristics

DC Loop Current       Filter Meets Spec Between 0 & 90mA DC
Stopband Attenuation

• Off-Hook (min):
• 25 kHz-50 kHz                    21 dB
• 50 kHz-12 MHz                  25 dB
• Off-Hook Insertion Loss
• At 1 kHz                            0.1 dB
• Off-Hook Insertion Loss Distortion
• 200 Hz - 4 kHz                   0.3 dB
• Off-hook Impedance Distortion with ZHPr
• Phone Port:
• ERL                        17 dB
• SRL-LO                  25 dB
• SRL-HI                     9 dB
• Network Port:
• ERL                       18 dB
• SRL-LO                  15 dB
• SRL-HI                   11 dB
• Envelope Delay
• 300Hz to 2.8kHz <100 us + -0.7”

Dimensions Specifications subject to change without notice