Fast Ethernet Media Converter: 
Single-Mode Single-fiber TX: 1310nm RX: 1550nm (20km): EL200CA-20

Single-Mode Single-fiber TX: 1550nm RX: 1310nm (20km): EL200CB-20

Single-Mode Single-fiber TX: 1310nm RX: 1550nm (40km): EL200CA-40

Single-Mode Single-fiber TX: 1550nm RX: 1310nm (40km): EL200CB-40

 

Xpresso EL200 Series
Data Links
Other Related Products
Overview

  • 10/100Base-T/TX to 100Base-FX Single-Fiber

  • Auto-negotiation 

  • Function as a converter as well as a two-port switch

  • Link-Fault-Pass-Thru for fiber breakage detection

General Information
 

Xpresso EL200 Series : 10/100Base-T/TX to 100Base-FX Single-fiber Single-Mode Media
Converter. 

Xpresso EL200 Series provides LED indicators for PWR, 10/100, LNK/ACT, and FDX/COL states. The  Link-Fault-Pass-Thru feature enables the disconnection of fiber cable be passed through the copper port and detected by other SNMP capable network equipment.

Xpresso EL200 Series fully comply with Ethernet/Fast Ethernet standards and provide one
port that auto-negotiates at 10/100Base-T/TX and a 100Base-FX Single-Mode Single-fiber
port with SC connector. DIP switches at the back panel allows user to select five different 
modes for the TX port: Auto-negotiation, 10M Half-duplex, 10M Full-duplex, 100 Half-duplex, 
and 100M Full-duplex. It functions as a converter as well as a two-port switch.

Link-Fault-Pass-Thru provide the function that acknowledges the user when there's a broken fiber link on a particular node/side of the connection.

Both of the EL200CA and EL200CB are powered by external power supply adapter. Installation of EL200 is simple and straight forward. These media converters from EtherWAN are palm- sized units in a stylish appearance.

 
Application Examples
 
Key Features
 

Product Features

  • EL200A: Transmit(TX) at 1310nm wavelength; Receive(RX) at 1550nm wavlength
  • EL200B:
    - Transmit(TX) at 1550nm wavelength; Receive(RX) at 1310nm wavlength
  • Provides one port of 10/100Base-T/TX with RJ-45 connector and one port of Single-fiber Single-mode 
    SC fiber connector.
  • DIP switches for RJ-45 port mode setting: Auto-negotiation, 10M half-duplex, 10M Full-duplex, 
    100M Half-duplex, 100M Full-duplex
  • Link-Fault-Pass-Thru enables the disconnection of fiber cable be propagated through the RJ-45 copper port.

 

 Meets a variety of installation requirements

  • Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX, 100Base-FX standards
  • Store-and-forward switching mechanism
  • LED Indication: PWR/ACT/LNK/FDX/SPD/COL.
  • Wall-mountable
  • 1024 MAC addresses

Speed Fast

  • Extended Single-Mode fiber optic distance up to 75km (46.6ml)
  • One push button for crossover cable or straight cable for TX port.
 
Technical Specifications
 
LED Report: Per Unit - Power Status, Speed Per Port - LNK/ACT, FDX/COL

Ethernet Standards: IEEE 802.3 10Base-T; IEEE 802.3u 100Base-TX/100Base-FX

Cable: 10Base-T 2-pair UTP CAT 3, 4, 5, up to 100m (328ft)
100Base-TX 2-pair UTP CAT 5, up to 100m (328ft)
100Base-FX 10/125um Single-mode fiber optic cable, up to 15km

Forwarding Rate: 14,880pps for 10Mbps; 148,800pps for 100Mbps
 
Physical Specifications
 

Environmental
Operating Temperature: 0º - 40º C (32º - 104º F)
Storage Temperature: -25º - 70º C (-13º -158º F) 

Humidity: 10 - 90% (non-condensing)

Power: External AC/DC required, 12VDC, 0.5A universal power supply. Power consumption: 12VDC, 0.6A, 7.2W

Dimensions: W109.2mm x D80.3mm x H23.8mm (4.29"x3.27"x0.94")

Emission Compliance: FCC part 15 Class A, CE Mark, VCCI Class A

Net weight: 0.8kg (1.7lb)

 

Ordering Information

 

Part No.

Port One

Port Two

Connector Type

Speed

Distance

Connector Type

Optical Wavelength

Distance

EL200CA-20

RJ45   10/100mbps   100m   SC Single Fiber TX: 1310nm RX: 1550nm

20km

EL200CB-20

RJ45

10/100mbps

100m

SC Single Fiber

TX: 1550nm RX: 1310nm

20km

EL200CA-40

RJ45

10/100mbps

100m

SC Single Fiber

TX: 1310nm RX: 1550nm

40km

EL200CB-40

RJ45

10/100mbps

100m

SC Single Fiber

TX: 1550nm RX: 1310nm

40km