100Base-FX Fast Ethernet Switch
The Xpresso switches represent the newest generation in Ethernet switching technology by supporting both 10Mbps and 100Mbps speed and half or full duplex transmission modes on the same port. By using standard auto-negotiation, EtherWAN provides a cost-effective way of integrating legacy 10Mbps segments with 100Mbps fast Ethernet networks and an ideal solution for extending the distance between two 100Mbps network segments.
Taking full advantage of fast Ethernet application-specific integrated circuit (ASIC), The Xpresso 1608 delivers the power of 100Mbps switching at a very aggressive price. It is equipped with 8 auto-negotiating ports that allow operation at either 100Mpbs or 10Mbps when in half duplex mode, or 200Mpbs or 20Mpbs when in full duplex mode.
The Xpresso 1608 also offers FX fiber-optic ports for distance requirements longer than 100 meters. One version accommodates eight 100BASE-FX ports, while a second accommodates six 100BASE-FX ports with two 10/100BASE-TX ports. The third Xpresso 1608 model version supports two 100BASE-FX ports with six 10/100BASE-TX ports.
Key
Feature 1
to 8 ports of 100Mbps fiber with ST or SC connectors
2
to 8 TX ports with auto-negotiation 10/100Mbps
Plug-and-play
Auto-negotiation
for speed and duplexity
True
non-blocking architecture
Full
wire speed forwarding
Store-and-forward
mechanism
Back
pressure and IEEE 802.3x compliant flow control
Supports
1K MAC address
One
uplink port activated by the push of a button
Front
panel port utilization and status LEDs
Standard
19" rack-mountable size |
Technical
Specification| Xpresso
1608: Eight 10/100BASE-T/TX ports with RJ-45 connectors
Xpresso1608F1:
Seven 10/100BASE-T/TX ports with RJ-45 connectors and One 100BASE-FX fiber ports with SC or ST connectors Xpresso1608F2:
Six 10/100BASE-T/TX ports with RJ-45 connectors and Two 100BASE-FX fiber ports with SC or ST connectors Xpresso
1608F6:
Two 10/100BASE-T/TX ports with RJ-45 connectors and Six 100BASE-FX fiber ports with SC or ST connectors Xpresso
1608F8: Eight 100BASE-FX fiber ports with SC or ST connectors
LED
Reports:
Per Unit- Uplink & Power Status (2 LEDs) Per Port- Utilization (4 LEDs) TX : 10/100Mbps Speed, Link, TX, Collision, RX, Duplex, (6 LEDs), FX : Link, Activity, Full Duplex ( 3 LEDs ) Ethernet
Standards:
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX/FX Cable:
10BASE-T 2-pair UTP Cat. 3, 4, 5 (Up to 100 meters) 100BASE-TX 2-pair UTP Cat. 5 (Up to 100 meters) 100BASE-FX 62.5/125 Multi-Mode fiber-optics cable, Up to 2000 meters(6560ft) Switching
Methods:
Store-and-Forward Forwarding
Rate:
14,880 pps for 10Mbps, 148,800 pps for 100Mbps |
Physical
Specification| AC
Input:100-240VAC, 47-63Hz internal universal power supply
Input
Fuse: 2A
Power
Consumption: 11W for Xpresso1608, 13W for Xpresso1608F1,
15W for Xpresso1608F2, 20W for Xpresso1608F6, 22W for Xpresso1608F8. Operating
Temperature: 0 C- 40 C (32 F- 104 F)
Storage
Temperature: -25 C- 70 C (-13 F-158 F)
Humidity:
10%-90% non-condensing
Emission
Compliance: FCC part 15 class A, CE Mark, VCCI Class A
Safety:
UL
Dimensions:
W440mm x D205mm x H45mm (17.3" x 8" x 1.8") Standard 19" Rack Mount Size
Net
weight: 2.5kg(5.5lb) |
Ordering
Information| Xpresso1608 | 8-port 10/100BASE-TX Fast Ethernet Switch |
| Xpresso1608FC1 | 7-port 10/100BASE-TX and 1-port 100BASE-FX Fast Ethernet Switch with SC connector |
| Xpresso1608FT1 | 7-port 10/100BASE-TX and 1-port 100BASE-FX Fast Ethernet Switch with ST connector |
| Xpresso1608FC2 | 6-port 10/100BASE-TX and 2-port 100BASE-FX Fast Ethernet Switch with SC connector |
| Xpresso1608FT2 | 6-port 10/100BASE-TX and 2-port 100BASE-FX Fast Ethernet Switch with ST connector |
| Xpresso1608FC6 | 2-port 10/100BASE-TX and 6-port 100BASE-FX Fast Ethernet Switch with SC connector |
| Xpresso1608FT6 | 2-port 10/100BASE-TX and 6-port 100BASE-FX Fast Ethernet Switch with ST connector |
| Xpresso1608FC8 | 8-port 100BASE-FX Fast Ethernet Switch with SC connector |
| Xpresso1608FT8 | 8-port 100BASE-FX Fast Ethernet Switch with ST connector |
