The Ether-FSH2402GT is a high performance 24(10/100Mbps) + 2(Gigabit) mixed Gigabit Ethernet switch with remote management capability.  It features a high performance switching engine with 8.8Gbps throughput and auto MDI/MDI-X function for every port.  But most importantly, it offers an impressive array of management functions at the same price level as an unmanaged switch. 

Windows Remote Management software
Conventionally, configuring a switch's smart management will require users to attach the computer (serial or printer port) directly to the switch's console port.  With Ether-FSH2402GS in-band management capability, users can configure the switch remotely through the Ethernet network.  The included Windows management software provides a very simple point-and-click interface to set all the functions.  Users can even backup settings to be restored in the future.  Best of all, the management utility can configure several switches at the same time. 

Powerful Management Features
The Ether-FSH2402GT is equipped with many practical management functions. 

• Per-port bandwidth control allow limiting the outgoing and incoming bandwidth separately for each port . 
• Central Switch management:  Configure several switches at the same time. 
• 802.1Q tag VLAN enables VLAN assignment across different switches.  The switch even provide controls to let single-cast, multi-cast, or broadcast traffic to pass between VLANs. 
• Quality of Service for multimedia applications:  the 802.1p compliance provide priority traffic management based on port, vlan-tag, or TCP/IP TOS information. 
• Link aggregation increase the uplink speed by allowing up to 7 trunk groups in 2 or 4 ports. 
• IGMP Snooping for IP multicast group management 
• Broadcast Storm control prevent the broadcast traffic from overflowing the network. 
• Loop detection alert the user when there is a loop formed inside the network on the front panel LED.  The management software's diagnostic function even report which port the loop occurs. 
• Port setting setting port speed and duplex mode, flow control 
• Auto Configuration Restore 
• Password authentication protection  

Whether your current network requires management functions or not , the Ether-FSH2402GT provide those management functions without any extra cost for future needs.   If you are looking for a reliable, powerful, and affordable 24+2 Gigabit switch, the Ether-FSH2402GT is your best choice. 

*Note: The Windows remote management allow configuration of several switches using the same utility on the Ethernet network (but not over Internet) 

Specifications
 

Standard Compliance  IEEE 802.3 10Base-T Ethernet  IEEE802.3u 100BaseTX standard  IEEE 802.3ab 1000Base-T Standard  IEEE 802.3u Nway auto-negotiation  IEEE802.3x flow control for full duplex, back-pressure for half-duplex  IEEE 802.1p/Q tage VLAN and QoS  IEEE 802.3ad link aggregation  Hardware Feature  24 x 10/100Base-TX Nway ports  2 x 10/100/1000Base-T Gigabit ports built-in  Auto MDI/MDI-X function  Factory Reset Button  Store-and-Forward architecture  Non-blocking wire speed switching architecture  8K MAC address  2.5Mbit Embedded memory Buffer.  8.8 Gbps Throughput  Shared frame buffer with starvation control  LEDs  Power, Loopdetect, DIAG  Link/ACT, FDX/COL, 100M  Gigabit Ports:   10/ACT, 100/ACT, 1000/ACT  FDX/Col  Dimensions: 432 × 180 × 44 mm,  19" rack mountable  Weight: 2.8 kg

Smart Remote Managements:  Windows Remote Management Software  Configure several switches on one program  Management through Ethernet network  Automatic Configuration backup and management password protection  Bandwidth Control  Separate Tx and Rx speed limit control for each port  128Kbps, 256Kbps, 512Kbps, 1Mbps, 2Mbps, 4Mbps, 8Mbps option  VLAN  Up to 32 VLAN groups, up to 24 ports per VLAN group  Port based or 802.1Q tag VLAN  Ingress rule for ingress filtering control  Unicast Inter-VLAN control  ARP Broadcast Inter-VLAN control  IP Multicast Inter-VLAN control  IGMP Snooping for IP multicast group management  Broadcast Storm Control to limit broadcast traffic  Status on bandwidth utilization, byte count, packet count, MIB counter  Loop detection LED on the front panel  Diagnostic software detects Trunking and Loop fault  Port speed, Duplex Mode, Flow Control  Built-in power supply:  100~240 VAC, 50 ~ 60 Hz, 0.4A,  10 Watts max.  Safety/EMI: meet UL, FCC, CE, Korea EMI standard

Ordering Information

• Ether-FSH2402GT     24+2 Win-Smart Gigabit  Ethernet Switch