The Ether-FSH2400R is a high performance 24-port port fast Ethernet switch with remote management capability.  It features an array of impressive management functions at the similar price level as an unmanaged switch

Windows Remote Management software
Conventionally, configuring a switch's smart management will require users to attach the computer (serial or printer port) directly to the switch's console port.  The Ether-FSH2400R doesn't need a serial or print port because it is equipped with WinSmart In-band management. It uses the unique RRCP protocol that enables the included Windows utility to manage the switch inside the LAN through the Ethernet interface. However; since it does not use IP protocol, it cannot be managed remotely from the Internet. The included Windows management software provides a very simple point-and-click interface to set all the functions.  Users can even backup settings to be restored in the future.  Best of all, the management utility can configure several switches at the same time. 

Powerful Management Features
The Ether-FSH2400R is equipped with many practical management functions. 

• Per-port bandwidth control allow limiting the outgoing and incoming bandwidth separately for each port . 
• Central Switch management:  Configure several switches at the same time. 
• 802.1Q tag VLAN enables VLAN assignment across different switches.  The switch even provide controls to let single-cast, multi-cast, or broadcast traffic to pass between VLANs. 
• Quality of Service for multimedia applications:  the 802.1p compliance provide priority traffic management based on port, vlan-tag, or TCP/IP TOS information. 
• Link aggregation increase the uplink speed by allowing up to 7 trunk groups in 2 or 4 ports. 
• IGMP Snooping for IP multicast group management 
• Broadcast Storm control prevent the broadcast traffic from overflowing the network. 
• Loop detection alert the user when there is a loop formed inside the network on the front panel LED.  The management software's diagnostic function even report which port the loop occurs. 
• Port setting setting port speed and duplex mode, flow control 

Whether your current network requires management functions or not , the Ether-FSH2400R provide those management functions without any extra cost for future needs.   If you are looking for a reliable, powerful, and affordable 24-port 10/100Mbps switch, the Ether-FSH2400R is your choice.

*Note:  The Ether-FSH2400R loses the user's setting when power off, it must be restored from your PC's configuration file. If you need the user's setting to stay inside the switch, please choose the Ether-FSH2400RS model.

*Note2: The Windows remote management allow configuration of several switches using the same utility on the Ethernet network (but not over Internet) 

Specifications
 

Standard Compliance  IEEE 802.3 10Base-T Ethernet  IEEE802.3u 100BaseTX standard  IEEE 802.3u Nway auto-negotiation  IEEE802.3x flow control for full duplex, back-pressure for half-duplex  IEEE 802.1p/Q tage VLAN and QoS  IEEE 802.3ad link aggregation  Hardware Feature  24 x 10/100Base-TX Nway ports  Auto MDI/MDI-X function  Factory Reset Button  Store-and-Forward architecture  Non-blocking wire speed switching architecture  8K MAC address  2.5Mbit Embedded memory Buffer.  8.8 Gbps Throughput  Shared frame buffer with starvation control  LEDs  Power, Loopdetect, DIAG  Link/ACT, FDX/COL, 100M  Dimensions/ Weight:  432 × 180 × 44 mm,  19" rack mountable/ 2.7 kg  Built-in power supply:   100~240 VAC, 50 ~ 60 Hz, 0.4A,  10 Watts max.  Safety/EMI: meet UL, FCC, CE, Korea EMI standard

Smart Remote Managements:  Windows Remote Management Software  Configure several switches on one program  Management through Ethernet network  Automatic Configuration backup and management password protection  Bandwidth Control  Separate Tx and Rx speed limit control for each port  128Kbps, 256Kbps, 512Kbps, 1Mbps, 2Mbps, 4Mbps, 8Mbps option  VLAN  Up to 32 VLAN groups, up to 24 ports per VLAN group  Port based or 802.1Q tag VLAN  Ingress rule for ingress filtering control  Unicast Inter-VLAN control  ARP Broadcast Inter-VLAN control  IP Multicast Inter-VLAN control  802.1p Prority: 2-level , Port Based, IP Based(TOS), VLAN TAG(TCI)  802.3ad Link Aggregation:  7 Trunk groups in 2 or 4 ports  IGMP Snooping for IP multicast group management  Broadcast Storm Control to limit broadcast traffic  Status on bandwidth utilization, byte count, packet count, MIB counter  Loop detection LED on the front panel  Diagnostic software detects Trunking and Loop fault  Port speed, Duplex Mode, Flow Control

Ordering Information

• Ether-FSH2400R     24-port Win-Smart Fast Ethernet Switch