FEATURES 

• Compatible Coding Schemes
  The PS-36 VDSL2 Master Splitter is compatible with all ADSL & VDSL2 coding schemes
  
   
• Meets ITU-T and ANSI Standards
  The PS-36 DSL Master Splitter is fully compliant with all North American ADSL and VDSL2 standards
  
   
• RJ Jacks and Terminal Block
  The PS-36 DSL Master POTS Splitter has both RJ jacks and screw type terminals for flexible wiring schemes
  
   
• Ring Trip Mitigation The unique design of the PS-36 reduces video pixelazation during ringing / ring-trip
  
   
• Easily Mounted
  The compact PS-36 can be wall-mounted with screws through the holes in the mounting flange or with double-stick tape
  
   
• Increased Bandwidth
  Supports frequencies to 30 MHz, 4096 VDSL2 subcarriers and data speeds of 200 Mbps

Download Data Sheet
 

The Wilcom PS-36 Master Splitter is a passive low-pass filter designed to provide POTS service in concert with VDSL2 technology. The device blocks high frequency (20kHz-30MHz) energy from interfering with voice equipment and prevents POTS noise from causing data errors on the xDSL connection. The PS-36 is backwards compatible with all xDSL systems.

The Wilcom PS-36 is ideally suited for video over xDSL applications such as IPTV (Internet Protocol Television) by providing robust ringtrip protection for non-zero coss ringers to eliminate video pixelization during off-hook and ring-trip events.

The PS-36 can be easily mounted inside the customer premises where the phone service enters the building. Two types of connection options are supported by the PS-36 splitter: a screw-type terminal block and standard RJ jacks. This allows the installer to simply connect the existing premise wiring to the PHONE connector or RJ jack on the splitter, and have POTS service up and running within minutes without expensive and time-consuming rewiring. A "home-run" connection with data-grade cable is recommended direct to the xDSL modem from the ATU-R/MODEM connection on the splitter.

Model PS-36i-01 uses professional-grade, gell-filled IDC connectors rather than a screw terminal block for quicker installation without wire stripping.
 

Ordering Information:

PS-36