|
Product Overview
Budge Tone IP Phone is a
next generation IP network telephone based on industry open standards.
Built upon innovative technology, it features market leading superb sound
quality and rich functionalities at ultra-affordable price.
Each IP phone has an unique
ID. You can dial your partner's ID of the IP phone online at anywhere in
the world as long as the IP phone is connected to the high speed Internet.
The SIP server will automatically build up the point to point voice communications
between both ends in seconds. Just pick up the phone set after the phone
rings. You can be able to start the digital conversation with the other
end as long as you want without spending a single penny. The IP Phone provides
an additional value of the existing Internet service without any changes.
The IP phone is designed
to pass through the NAT or firewall. So you don't need to configure anything
in the router or gateway if the phone is behind the router. Just plug and
play it. As simple as that. The phone has more features with current version
or next versions.
Key Features
-
Support SIP 2.0, TCP/UDP/IP,
RTP/RTCP, HTTP, ARP/RARP, ICMP, DNS, DHCP, NTP, TFTP protocols
-
Support NAT traversal using
IETF STUN and symmetric RTP (compatible with Cisco’s ATA-186, etc)
-
Support SIP SIMPLE standard
for Instant Messaging and Presence (Model 102D)
-
Interoperable with various 3rd
party SIP end user device, Proxy/Registrar/Server, and gateway products
(e.g., MS Messenger, Cisco IP phone and gateway, etc)
-
Advanced Digital Signal Processing
(DSP) to ensure superb hi-fidelity audio quality
-
Advanced and patent pending
adaptive jitter buffer control, packet delay and loss concealment technology
-
Support most popular vocoders
including G.711 (a-law and u-law), G.726, G.728, and wide-band G.722 (Model
102D) and more. Dynamic negotiation of codec and voice payload length
-
Support standard voice features
such as Caller ID Display or Block, Call Waiting, Hold, Transfer, Forward,
FLASH, in-band and out-of-band DTMF (RFC2833), Dial Plans, off-hook auto
dial, configurable emergency dialing (e.g., 911), early dial, click-to-dial
-
Support 3-way conferencing (Model
102D), full duplex hands-free speakerphone, superior frequency domain acoustic
echo cancellation (pending), redial, call log, volume control, voice mail
with indicator, downloadable ring tone (pending)
-
Support Silence Suppression,
VAD (Voice Activity Detection), CNG (Comfort Noise Generation), Line Echo
Cancellation (G.168), and AGC (Automatic Gain Control)
-
Support DIGEST authentication
and encryption using MD5 and MD5-sess.
-
Provide easy configuration thru
manual operation (phone keypad and Web interface) or personalized automated
provisioning via central configuration file for mass deployment.
-
Support for Layer 2 (802.1Q
VLAN, 802.1p) and Layer 3 QoS (ToS, DiffServ, MPLS)
-
NAT-friendly remote software
upgrade capability (via tftp) even from behind firewalls/NATs.
-
Built-in alarm-clock, music
on hold and downloadable music ringing tone (Model 102D)
-
Support for fail-over SIP server
and DNS server (pending)
Hardware Specification
-
Spec/Model BudgeTone-100
Series
-
LAN interface 1xRJ45 10Base-T
-
Phone Case 25-button keypad
12-digit caller ID LCD
-
Universal Switching Power Adaptor
(UL certified) In: 100-240V AC Out: +5V DC, 400mA
-
Dimension 18cm (W) x 22cm
(D) x 6.5cm (H)
-
Weight 2 lbs (0.9 kg)
-
Operating Temperature
32 - 104 oF (0 - 40 oC)
-
Humidity 10%-95%
-
Compliance FCC/CE certified
Ordering Information
-
BT100 - BudgeTone-101
One LAN interface port
-
BT102 - BudgeTone-102
One LAN interface port, one PC interface port
This is a Preliminary Specification
only and hence is subject to changes without notice
|